The LMRL-100 Isolated Relay Interface is an optional component for a Digital Lighting Management (DLM) system. It enables seamless integration of third party devices such as HVAC systems or exhaust fans.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Specifications
General Info
| Color | White | ||
| Product Series | LMRL | ||
| Type | Interface | ||
| Material | ABS | ||
| Application Sector | Commercial | ||
| Product Line | Wattstopper | ||
| Country Of Origin | China | ||
| Installation Location | Wall | ||
| Warranty Type | 5-Year | ||
| Standard | UL 2043, cUL, FCC part 15, RoHS | ||
| UPC Number | 754182925926 | ||
| Works With | Third Party Devices |
Dimensions
| Product Depth US | 1.7 in | ||
| Product Height US | 2.9 in | ||
| Product Volume US | 26.6 cu in | ||
| Product Width US | 2.0 in | ||
| Product Weight US | 0.1 lb |
Additional Information
| RoHS Compliant | Yes | This product meets the material restrictions of Article 4 of the RoHS Directive (2011/65/EU), including Commission Delegated Directive 2015/863. |
Technical Information
| Current Draw | 7 mA | ||
| Number of Connections | 2 | ||
| Topology | Free Topology | ||
| Wire Connection Type | RJ-45, Terminal Block | ||
| Compatibility | DLM Wired | ||
| Contact Configuration | Common, N-C, N-O | ||
| Indoor/Outdoor | Indoor | ||
| Input Voltage | 24 VDC | ||
| Location Rating | Dry | ||
| Mounting Type | 3 in Octagonal Box, 4 in J-Box, DIN Rail, Inside 1-Gang J-Box | ||
| Number of Relays | 1 | ||
| Operating Temperature | 0°-40°C, 32°-104°F | ||
| Operating Temperature Max | 104 °F | ||
| Operating Temperature Min | 32 °F | ||
| Operating Humidity | 5-95% RH (Non-Condensing) | ||
| Output Voltage | 24 VDC | ||
| Storage Temperature | 23° - 176° F |
Resources
Installation Instructions
CAD Drawings
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can this isolated relay LMRL-100 be used to control 120V exhaust fans or do the exhaust fans require 24V low voltage contact points for integration with this relay?
Greetings,
The LMRL-100 requires a set of 24v AC/DC dry contacts for integration, it is not designed for 120v input
Date published: 2024-05-08
I need to purchase twelve (12) DIN Rail Mount Adapter for the LMRL-100 (Isolated Relay Interface). For reference, see the LMRL-100 cutsheet on the second page lower right-hand side. Are these available without purchasing the Isolated Relay?
Good evening
If you still need any help from Wattstopper for purchasing or support please contact us at 1-800-879-8585 and choose any option that fits your needs.
Date published: 2022-06-21
I've installed a LMRL-100 onto an existing room to control a third party load. When I discover the room with the LMCI-100 tool using the LMCS-100 version 4.10.3 build 2020-10-22 it does not see the relay. Is this device type not supported in the software?
The LMRL is not discoverable in LMCS.
Date published: 2024-06-25
Bazaarvoice SAP Hybris Integration Version 2.8.1
Recently Viewed
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
LMCP-LI48 | Wattstopper
The LMCP retrofit kits provide a simple upgrade option to existing Wattstopper Lighting Integrator and other legacy relay panels (GE and Horton Controls SWC, SWS, SWSP and TLC panels).
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
576-A10-010 | Quiktron
Q-Series Patch Cords, CAT6A Shielded, booted, Gray