
Discontinued - Universal Dimming Room Control ler 1 channel, 16 Amp,
LMRC-221
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
Replaced by BF-SDS10V-AST
LMRC-220 Series Digital Room Controllers include one or two output(s) to control a total of up to 20 amps for certain load types. Load ratings include incandescent, magnetic low voltage, forward phase compatible electronic low voltage and LED drivers, neon and cold cathode, and dimmable two-wire and three-wire fluorescent ballasts, and E-ballasts.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Versatile 20A controllers with line voltage relay(s) and triac-based forward phase control dimming
- Compatible with most load types; three selectable dimming curves for each load
- Plug to other components using Cat 5e cables with RJ45 connectors eliminating wiring errors
- Plug n’ Go automatic configuration for quick startup
- Store load preset level and 16 scene preset levels for each load
- Facilitate energy saving dimming control strategies including automatic daylight harvesting
Specifications
General Info
Product Line | Wattstopper | ||
Replaced by Part Number | BF-SDS10V-AST | ||
UPC Number | 754182928897 | ||
Country Of Origin | China |
Additional Information
DesignLights Consortium Qualified System | Yes |
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
Can the LMRC-222 Universal Room Controller connect to the LMRC-212 Room Controller to support lighting loads with 0-10V Dimming & ELV Dimming?
Hello,
Yes they can be connected via Cat5, and be controlled by i.e. LMDM-101
Date published: 2023-07-11
Can you use a wireless dimmer switch with a LMRC room controller?
If your LMRC is wireless (ie LMRC-611) then you can use a wireless switch. If you have a wired system (ie LMRC-111) you cannot.
Date published: 2021-09-17
Where is the specification sheet for this product
The resources for the LMRC-221 can be found here:
https://www.legrand.us/lighting-controls-and-systems/power-packs-and-load-controllers/room-controllers/dlm-universal-dimming-room-controller-1-channel-16a/p/lmrc-221?text=LMRC-221
Take a look at the Cutsheet or Installation Instructions for spec info.
Date published: 2021-08-03
Can scene presets be triggered via a switch closure, relay, or logic?
With proper programming, a scene can be triggered by a switch or schedule.
Date published: 2021-07-26
How to keep lights on for a specific amount of time
How do i program the lighting
Bazaarvoice SAP Hybris Integration Version 2.8.1