Low Voltage Wall Switch, 1-Button w/LED, White
LVSW-101-W
Wattstopper
Bazaarvoice SAP Hybris Integration Version 2.8.1
LVSW-100 Series Low Voltage Switches are lighting control devices that use conventional point-to-point low voltage wiring for control of single or multiple loads. Each button provides a momentary contact that is intended for use with compatible low voltage relay panels or similar lighting control panels or devices. Each button has an LED indicator that can serve as a status indicator or as a locator light.
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Sleek single gang devices fit decorator wall plates (not supplied); 1-, 2-, 3-, 4-, and 8-button models
- Blue LED indicator on each button can be used as a locator light or as a status indicator
- Five color options and custom engraving options; standard buttons may be replaced in the field
- The product meets the materials restrictions of RoHS
Specifications
General Info
| Product Line | Wattstopper | ||
| Color | White | ||
| UPC Number | 754182931309 | ||
| Country Of Origin | China | ||
| Package Quantity | 1 | ||
| Type | Switch |
Dimensions
| Product Width US | 1.8 in | ||
| Product Weight US | 0.2 lb | ||
| Product Volume US | 20.3 cu in | ||
| Product Depth US | 1.6 in | ||
| Product Height US | 4.1 in |
Technical Information
| Number of Gangs | 1 | ||
| Number of Buttons | 1 | ||
| Amperage | 2 mA | ||
| Indoor/Outdoor | Indoor | ||
| Voltage | 24 V, 24 V |
Resources
Instruction Sheet
Cutsheet
Supporting Document
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
can you tell me how to wire the LVSW-101 with 3 wire control , that’s on the BZ power packs , i understand i need to bring 24V to the switch and the switched 24V back to the grey wire on the pack , but this does not light up the LED on the switch
How do I wire the LED on the LVSW-101 switch to a BZ power pack.
This procedure will power the LED on the button of the LVSW-101
and keep it on continuously wither the load is on or off in three
easy steps:
Step 1:
Remove the J1 shunt jumper on the back of the switch to
separate the switch common from the LED common.
Step 2:
Connect the low voltage black wire from the BZ power pack to the
LED common on the right hand side of the back of the switch.
Step 3:
Connect the red low voltage wire (24VDC)
to the LED1 terminal on the right hand side of the back of the switch.
The LED should now be powered by the power pack.
Date published: 2023-09-11
I av a customer that bought all legrand products lvsw101w elcu 200 dt300 and bz150 questions is can the lvsw101w can that switch be use as a 3wayswitching application because the have two separate entrances that they need both switces to turn on and off
Hi Jermaine,
Multiple LVSW-101 switches can be hooked up in parallel to the power pack for multi way switching using the red(24V) and grey(signal) LV wires.
Date published: 2023-08-09
Are there light fixtures that can be used with these switches. I want to instal one Light circuit with 2 switches. The light 120 vac with 24v control
The LVSW-100 switch is a low voltage (24v) momentary dry contact, single pole switch.
Date published: 2023-03-27
Would the stainless steel wall plate SL26CC25 work with this switch?
Yes, devices fit decorator wall plates (not supplied)
Date published: 2023-01-11
In Watt Stopper I have a customer as series LVSW100 & he is looking for single pole switch Momentary on & Momentary off is this possible?
The LVSW-100 switch is a low voltage (24v) momentary, single pole switch.
Date published: 2022-04-13
Bazaarvoice SAP Hybris Integration Version 2.8.1