The Device that Receives a Signal or Stimulus (As Heat or Pressure or Light or Motion Etc.) and Responds to it in a Distinctive Manner

Style, Type, Size, Etc. of the Enclosure of a Device

Refers to the style or intended usage of a wall plate.

Trust in quality and compliance. Use this filter to find products that have undergone thorough testing and evaluation to ensure they meet the quality and safety standards for a wide range of certifications.

The industrial standard(s) to which a device is manufactured, operated, or tested.

The maximum load that a device is designed to withstand without breakage or loss of performance.

Denotes the type(s) of load that can be applied to a dimmer, which determines its compatible light sources.

The Difference of Electrical Potential Between Two Points of an Electrical or Electronic Circuit Entering a System

The technology used by a device to sense a change in signal or stimulus.

Where a Device is or is to be Installed

Indicates whether a device requires a neutral wire to function properly.

Denotes the classification used to assess the suitability or performance of a device based on the specific environmental location in which it operates.

Describes the mode of operation for devices that can be turned on, indicating whether they stay on continuously or operate on a timer or sensor.

Describes the method of switch operation, indicating whether it controls one circuit (single-throw) or switches between two circuits (double-throw).

The Temperature at Which the Unit is Safely Operated or Kept without Damaging or Changing the performance Characteristics of the Unit

Indicates the highest possible temperature a device can be safely used without the risk of failure or damage.

Denotes whether a product comes prewired for quicker installation.

Describes the method used to connect wires to the device, such as screw terminals, push-in connectors, or lead wires.

Style or Type of Connection Used

The frequency of alternating current (AC) in an electrical power system, measured in Hz. Also commonly referred to as Utility Frequency, Power Line Frequency, or Mains Frequency.

Alpha-Numeric Code Applied to Connectors to Guarantee Consistency and Interchageability Between Manufacturers

The Voltage Measured at the Output Terminals of a Power Supply

Describes the type and size of wire that the receptacle's terminals can securely hold (typically provided as a range in gauge size).

Describes the maximum electrical current the conductor or device can carry through its USB ports before sustaining immediate or progressive deterioration.

Describes the maximum electrical power a USB receptacle can safely output.

Describes the design and ways of connecting various parts of a device with cable and/or wire.

The total Possible Sensing Capability of the Sensor, Beginning After the Deadband, and Extending Out as Far as the Sensor is Able to Reach Effectively

Describes the total area, measured in square footage, within which a sensor can detect presence or movement.

Describes the shape of the area that a sensor is able to detect presence or movement within, measured in degrees.

The overall depth of a product.

The overall height of a product.

The overall length of a product.

The overall width of the product.

The general size of the the included wall plate. The size may determine whether it suits your personal application!

The Longest Dimension of Insulated Conductors

The Linear Extent of Cord in Space from one End to the Other

The amount of switches on the plate.

The Number of Keys/Switches in the item Used for Selecting a Particular Function

Our products, brands, and resources fall under many unique categories based on the product's type or function. Filter and find a product you are looking for based on a Legrand product category.

Refers to the expected environment(s) or intended usage(s) for a product (e.g. Residential, Commercial, Industrial, etc.).

Choose from one of Legrand's brands.

The color of the product itself

Indicates the primary material(s) used to construct a product.

Product is available to buy on Legrand.us

Refers to the style or operation method used by a switch to control lighting or other electrical devices.

Unique characteristics and functionality that set the product apart from others in its field.

Number of electrical switches

Single pole switches have two terminals and control one light fixture from one location. 3-Way switches have three terminals and can control one fixture from two locations. 4-Way switches have four terminals can control one fixture from three locations. Multi-location refers to switches connected to a smart lighting system.

Need to ensure your choice works with your device, system, or software? Select your needs using this filter to confirm compatibility.

The Rate at Which Energy is Drawn from a Source that Produces a Flow of Electricity in a Circuit

amount of watts used

The product warranty that accompanies the specific product.

Describes the unique qualities or characteristics of an electrical outlet that make it better suited to different uses. The listed qualities may give the outlet improved safety performance, increased efficiency, or additional functionality.

Number of USB ports

The Number of Electrical Wall Outlets Designed for Use with a Plug

Maximum electrical current the conductor or device can carry before sustaining immediate or progressive deterioration