radiant® Single-Pole 3-Way Vacancy Sensor, White
RRW600VTC
radiant Collection
Bazaarvoice SAP Hybris Integration Version 2.8.1
$33.39 USD
Never worry about leaving the lights on, with the radiant® Vacancy Sensor. It automatically shuts off when a room is empty, and includes an adjustable delay setting of up to 30 minutes to match your needs. Designed for ease and style, it features a built-in locator light, and the sleek, clean lines of radiant® for a sophisticated touch.
Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.
Quantity
In Stock
- Send
- Save as PDF
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.
Features
- Works with various lights/bulbs, including: Incandescent, LED, fluorescent, compact fluorescent (CFL), magnetic low-voltage (MLV) and electronic low-voltage (ELV), 1/6 hp.
- Turn the light on when you enter, and let it turn itself off automatically after you leave for true convenience.
- Features an adjustable time delay, letting you set the automatic shut-off after a specified window of time. Delay settings range from 30 seconds to 30 minutes after the room is vacated.
- Installs easily in place of a standard light or fan (single-pole) switch. No neutral wire required.
- Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
- More color options available to fit any style, including finishes to match current hardware and lighting trends.
- Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
- The secret for always turning the lights off? A device that does it for you automatically. Perfect for bathrooms, hallways, closets, and garages.
Specifications
General Info
| Product Line | Pass & Seymour | ||
| Color | White | ||
| UPC Number | 785007496604 | ||
| Country Of Origin | China | ||
| Features | Motion Sensor | ||
| Switch Type | Motion Sensor | ||
| Application Sector | Residential | ||
| Standard | cULus |
Listing Agencies / 3rd Party Agencies
| cULus Listed | Yes |
Technical Information
| Target Size | 180° | ||
| Response Frequency | 60 Hz | ||
| Sensor Type | Occupancy | ||
| Number of Poles | Single Pole | ||
| Mounting Type | Box | ||
| Sensing Range | 600 sq ft | ||
| Sensitivity | 60Hz | ||
| Load | 120VAC | ||
| Environmental Conditions | Indoor Use Only |
Resources
Guide Form Specifications
Supporting Document
Cutsheet
Installation Instructions
Sell Sheet
Brochure
Premium Content
Reviews
Bazaarvoice SAP Hybris Integration Version 2.8.1
Questions & Answers
is this switch Ok on a 20 amp circuit?
Yes this device can be used on a 20 A, 120V circuit.
Date published: 2023-04-10
We just bought new construction that is full of these discontinued switches with no instructions. How do you change the settings?
The Radiant Vacancy sensor is still an active model number. Here is the link to the full set of instructions for it. See Table 1 and Table 2 for changing it's settings.
https://legrand.webdamdb.com/directdownload.php?ti=55653156&tok=6WqaBwyH0xLnEKUBoQO49gRR
Date published: 2022-07-19
the switch is set to vacant - how do I switch to occupied?
The RRW600VTC is a "vacancy only" sensor switch.
The RRW600UTC has the options for occupancy and vacancy modes.
Date published: 2022-11-29
Does this unit require a ground to function properly?
Yes, our motion sensors require a solid Ground connection to function.
Date published: 2020-06-18
I have installed this sensor and played with the settings to get it to shut off and it just shut off - even after 30 minutes. Am I doind something wrong?
I would contact us directly so we can go through the setup tables with you for the sensor to ensure it is set correctly for your application.
Radiant products
1.800.223-4162 opt 3
Mon - Fri: 8am - 8pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2020-02-26
When I enter the programming to the sensor, it works correctly. However, the moment the light goes out, the sensor is deactivated 1 minute later and no longer turns on. I must turn on the light manually.
It sounds like the sensor is in Vacancy mode(Manual ON) and needs to be put into Occupancy mode(Auto ON). You can contact Technical Support for assistance with the programming for the sensor.
Radiant products
1.800.223-4162 opt 3
Mon - Fri: 8am - 8pm EST
(excluding holidays)
Email Us - tech.support@legrand.us
Date published: 2020-07-15
How is the length of time for the light to be on adjusted on the motion sensor wall control. Electrician threw the directions away after he installed?
You can adjust the time delay on the sensor by using Table 1 in the attached instruction sheet.
https://www.legrand.us/-/media/brands/radiant/resources/installation-instructions/radiant%20120v%20single%20pole%20vacancy%20sensor.ashx
Date published: 2019-09-10
I lost my instruction sheet for the Radiant Motion Sensor light switch. How do I change the 30 second delay to 10 minutes?
Here is the link to the complete instruction sheet for the Radiant Vacancy sensor(Model # RRW600VTC):
https://www.legrand.us/-/media/brands/radiant/resources/installation-instructions/radiant%20120v%20single%20pole%20vacancy%20sensor.ashx
See TABLE 1 for adjusting your time delay.
Date published: 2019-03-28
Bazaarvoice SAP Hybris Integration Version 2.8.1
You may also like...
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
064875 | Pass and Seymour
Turns lights on/off when motion is detected or absent. Part of Smart Lighting with Netatmo.
$68.99
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNRH1LA | radiant Collection
Creates a robust, dedicated network for the radiant with Netatmo solution.
$102.63
Added to Favorites
Go to favorites
Remove from favorites?
Something went wrong. Please try again later.
WNP20 | radiant Collection
Plug it in and start dimming lights from anywhere. Part of the radiant with Netatmo solution.
$64.96