text.skipToContent text.skipToNavigation

Specifications: Single Pole, Compatible with all loads, 600W 120V 60Hz Rating

Hands free. Simply walk into the room to turn on the lights.

Energy savings. Automatically turns lights on when you enter a room, and off when you leave.

Front of radiant® Single Pole 3-Way Occupancy Sensor, White with plate cover

Front of Stainless Steel and Gold radiant® Single Pole 3-Way Occupancy Sensors

radiant® Single Pole 3-Way Occupancy Sensor, White

Name: radiant® Single Pole 3-Way Occupancy Sensor, White
Brand: radiant Collection
SKU: RRW600UTCCCV4
Price: 41.22
Availability: InStock

RRW600UTCCCV4 radiant Collection

$41.22 USD

Upgrade your space with Legrand's newest LED dimmer switch in the radiant® Collection. Designed specifically for flicker-free control of today's dimmable LED light bulbs and fixtures, this dimmer features advanced circuitry to offer a superior lighting control experience that works right out of the box. The dimmer switch boasts a variety of user adjustments to adapt to a wide range of dimmable LED lights, eliminating unpleasant flickering, pop-ons and more. As a part of the radiant® Collection, the advanced dimmer for LED lights also features clean lines and smooth control for a sophisticated touch. Pair with a screwless radiant® Wall Plate and other designer switches and outlets from the Collection for a cohesive design throughout the home. Made exclusively for use with screwless Wall Plates from the radiant® Collection, sold separately.*Not intended for use with 0-10V, Magnetic Low Voltage and Electronic Low Voltage Drivers.

Color White

Free shipping on orders over $49 & free returns

Quantity

In Stock

Send
Save as PDF
Added to Favorites Go to favorites

Remove from favorites?

Something went wrong. Please try again later.

Features

Passive infrared (PIR) sensor switch technology with 180° coverage up to 600 sq. ft. Rated for up to 600W (5A) of LED lighting.
Works with virtually any bulb/fixture, including: LED, incandescent, fluorescent, compact fluorescent (CFL), magnetic low-voltage (MLV) and electronic low-voltage (ELV), 1/6 hp.
Turn the light on when you enter, and let it turn itself off automatically after you leave for true convenience. Perfect for bathrooms, hallways, closets, garages, and more.
Locator light illuminates when switch is off, emitting a soft glow to help you find it in the dark.
Features an adjustable time delay to off after no motion is detected. Delay settings range from 30 seconds to 20 minutes after the room is vacated (default 5 minute delay).
Auto ON/Auto OFF functionality as default. Easily configurable to Manual ON/Auto OFF to meet any need or preference in the home.
Replace any basic light or fan switch in 15 minutes or less. Supports single pole and multi-location installs. No neutral required.
Complete the look with a sleek, screwless radiant® Wall Plate, and coordinate with other designer switches and outlets available from the radiant® Collection.
More color options available to fit any style, including finishes to match current hardware and lighting trends.

Specifications

General Info

Color	White
Type	Switch
Material	Polycarbonate, Steel
Finish	Satin
Application Sector	Hospitality, Light Commercial, Multi-Dwelling Unit, Residential
Product Line	Pass & Seymour
Country Of Origin	China
Features	Adjustable Time Delay, Motion Sensor
Installation Location	Wall Box
Switch Type	Motion Sensor, sofTap
Warranty Type	Limited Lifetime Warranty
UPC Number	785007496574

Dimensions

Product Depth US	1.88 in
Product Height US	2.63 in
Product Width US	1.69 in

Technical Information

On Function	Selectable Auto/Manual
Requires Neutral Wire	No
Wire Connection Type	Flying Leads
Indoor/Outdoor	Indoor
Input Voltage	120 VAC
Line Frequency	60 Hz
Load Rating	120V 5A (ELV), 120V 5A 600W (CFL), 120V 5A 600W (LED), 120V 600VA (Fluorescent), 120V 600VA (MLV), 120V 600W (Halogen), 120V 600W (Incandescent)
Load Type	CFL, Fan Motor, Fluorescent, Halogen, Incandescent, LED
Mounting Type	Wall Box
Number of Poles	Multi-Location, Single Pole 3 Way
Timer Duration	30 Seconds-20 Minutes, 5 Minutes
Operating Humidity	0-95% RH (Non-Condensing)
Horsepower Rating	1/6 HP @ 120 VAC
Sensing Range	Major Motion 35 ft, Minor Motion 20 ft
Sensor Type	Occupancy, Vacancy
Sensor Technology	Passive Infrared (PIR)
Sensor Coverage	600 sq ft
Sensor Coverage Pattern	180 °
Voltage	120 VAC
Wattage	600 W
Wire Size	#14 - #10 AWG

Resources

i adjusted my rrw600utc to 5 minutes and now it times out, turns off for 1 second and turns back on and keeps doing that

Asked by: jerry

Thank you for your inquiry. To provide further assistance with your request, we require additional information. Please get in touch with Legrand Pass & Seymour Technical Support at (800) 223-4185 between 8:00 a.m. and 6:00 p.m. EST, or via email at Tech.Support@legrand.us.

Answered by: Pass & Seymour Technical Support

Date published: 2024-08-12

By the diagram, it looks like there are 2 motion sensors on this switch - one for close range and one for long range. The longer range sensor will pick up motion past the door into the next room. Is there a way to mask or set sensitivity for the sensor?

Asked by: Todd

Thank you for reaching out. The RRW600UTC sensor can be programmed as either an Occupancy or Vacancy sensor. However, it does not offer a feature to adjust sensitivity or coverage range.

Answered by: Pass & Seymour Technical Support

Date published: 2025-12-03

where can I get a wiring diagram for Legrand RRW600U?

Asked by: Jim

Thank you for your inquiry. You can locate the installation instructions on the product landing page for part number RRW600UTC in the Resources section. If you have any other questions or comments, please get in touch with us at (800) 223-4185 8:00 a.m. – 6:00 p.m. EST. Best Regards, Technical Support

Answered by: Pass & Seymour Technical Support

Date published: 2024-04-15

Occupancy mode in instructions says RRW600U allows the load to be turned ON manually as well, and turn OFF automatically at the desired time delay. In my 3-way switch installation pressing either switch without motion detected does not turn on light.

Asked by: Mike

Occupancy mode operates in an "Auto on/Auto off" fashion. You can press the manual button to turn the load on or off as desired. If you're having trouble manually operating the device, it's likely an issue with the installation. Please contact us in Technical Support so we can help you. 844-957-3783 M - F | 8 - 6p ET

Answered by: Wiremold Tech Support

Date published: 2023-08-09

Does this sensor have a setting to recognize ambient light? In a room with plenty of light during the day it seems un-necessary for a light to come on all the time. I have seen some competitors that advertise their switch recognizes ambient light

Asked by: SVerdi

This particular model doesn't offer an ambient light sensor.

Answered by: Wiremold Tech Support

Date published: 2023-03-21

I have a split entry. The foyer light is controlled with one switch in the foyer, one switch at the bottom of the stairs, and one at the top of the stairs. I in stalled the sensor in the foyer for obvious reasons, but It does not operate as expected

Asked by: Frank

I’ve thought this through, and I think this should work in a 4way circuit. Wire as legrand prescribes to the three way but then run the two poles from that three way to the 4 way and terminate the other half of the four way to nc and ground. That should work and the legrand engineers should be ashamed if it works, don’t see how it wouldn’t.

Answered by: Frank Erling

Date published: 2023-03-08

On wiring sensor switch to replace a single on off switch to a light,where does the black wire go,where does the red wire go and where does the blue and white stripe wire go?

Asked by: Jerry Mertz

Hello Jerry, Please contact Pass & Seymour Technical Support for further assistance with your request. Pass & Seymour Technical Support Phone #: 800-223-4185 Monday - Friday | 8:00 am - 6:00 pm Eastern Standard Time (excluding holidays) Best Regards, Technical Support

Answered by: Pass & Seymour Technical Support

Date published: 2023-03-06

in a 3-way application, I put this on one terminal, then what do I need to pair it with? the same type of switch (3-way with sensor), or a regular 3-way switch with no sensor?

Asked by: CL

This device can be used in single or multilocation applications. For a three way installation, you could use either (2) sensors or (1) sensor and 1 three way switch.

Answered by: Wiremold Tech Support

Date published: 2024-08-21

radiant® Single Pole 3-Way Occupancy Sensor, White Questions - page 2

radiant® Single Pole 3-Way Occupancy Sensor, White

Features

Specifications

Resources

Cutsheet

Installation Instructions

Brochure

Specifications

Supporting Document

Catalog

Sell Sheet

Premium Content

Reviews

Questions & Answers

i adjusted my rrw600utc to 5 minutes and now it times out, turns off for 1 second and turns back on and keeps doing that

By the diagram, it looks like there are 2 motion sensors on this switch - one for close range and one for long range. The longer range sensor will pick up motion past the door into the next room. Is there a way to mask or set sensitivity for the sensor?

where can I get a wiring diagram for Legrand RRW600U?

Occupancy mode in instructions says RRW600U allows the load to be turned ON manually as well, and turn OFF automatically at the desired time delay. In my 3-way switch installation pressing either switch without motion detected does not turn on light.

Does this sensor have a setting to recognize ambient light? In a room with plenty of light during the day it seems un-necessary for a light to come on all the time. I have seen some competitors that advertise their switch recognizes ambient light

I have a split entry. The foyer light is controlled with one switch in the foyer, one switch at the bottom of the stairs, and one at the top of the stairs. I in stalled the sensor in the foyer for obvious reasons, but It does not operate as expected

On wiring sensor switch to replace a single on off switch to a light,where does the black wire go,where does the red wire go and where does the blue and white stripe wire go?

in a 3-way application, I put this on one terminal, then what do I need to pair it with? the same type of switch (3-way with sensor), or a regular 3-way switch with no sensor?

You may also like...

radiant® Single Pole 3-Way Occupancy Sensor, White

Features

Specifications

Resources

Cutsheet

Installation Instructions

Brochure

Specifications

Supporting Document

Catalog

Sell Sheet

Premium Content

Related Products

Reviews

Questions & Answers

i adjusted my rrw600utc to 5 minutes and now it times out, turns off for 1 second and turns back on and keeps doing that

By the diagram, it looks like there are 2 motion sensors on this switch - one for close range and one for long range. The longer range sensor will pick up motion past the door into the next room. Is there a way to mask or set sensitivity for the sensor?

where can I get a wiring diagram for Legrand RRW600U?

Occupancy mode in instructions says RRW600U allows the load to be turned ON manually as well, and turn OFF automatically at the desired time delay. In my 3-way switch installation pressing either switch without motion detected does not turn on light.

Does this sensor have a setting to recognize ambient light? In a room with plenty of light during the day it seems un-necessary for a light to come on all the time. I have seen some competitors that advertise their switch recognizes ambient light

I have a split entry. The foyer light is controlled with one switch in the foyer, one switch at the bottom of the stairs, and one at the top of the stairs. I in stalled the sensor in the foyer for obvious reasons, but It does not operate as expected

On wiring sensor switch to replace a single on off switch to a light,where does the black wire go,where does the red wire go and where does the blue and white stripe wire go?

in a 3-way application, I put this on one terminal, then what do I need to pair it with? the same type of switch (3-way with sensor), or a regular 3-way switch with no sensor?

You may also like...