Product Family
Used to identify and differentiate offerings within a particular product line. Product families are typically treated as adjectives. It is not recommended to use the product line (ex: Wiremold®) and product family names (Evolution™) together. This will introduce a level of unnecessary confusion for the audience.
Indoor/Outdoor
Enviromental Conditions rating on the product. Indoor Only, Outdoor, Both
Line Frequency
The frequency of alternating current (AC) in an electrical power system, measured in Hz. Also commonly referred to as Utility Frequency, Power Line Frequency, or Mains Frequency.
Brand
Choose from one of Legrand's brands.
Color
The color of the product itself
Mounting Type
The way the item is mounted for display. The method by which a sign or label is affixed to a surface for display. Many signs will not have any defined mounting type and so will have no value captured for this attribute.
Sensor Type
The Device that Receives a Signal or Stimulus (As Heat or Pressure or Light or Motion Etc.) and Responds to it in a Distinctive Manner
Standard
The industrial standard(s) to which a device is manufactured, operated, or tested.
Features
Unique characteristics and functionality that set the product apart from others in its field.
Input Voltage
The Difference of Electrical Potential Between Two Points of an Electrical or Electronic Circuit Entering a System
Installation Location
Where a Device is or is to be Installed
Number of Connections
Type
Value that Specifically Names the Type/the Application Value of the Closest Piece of Equipment/the Designated Type of Construction/the Generic Type/the Manufacturer Type Designation/the Specific Function/the Type of Application
Warranty Type
The product warranty that accompanies the specific product.
Room Controllers
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS, Area Lighting Controller w/0-10V Dimming, Damp RatedEN-ALC-1R10V-GB2BKDR WattstopperThe Area Lighting Controller (ALC) provides a high-power switching and dimming interface between a group of luminaires and the GreenBusâ„¢ communication network and is Damp Rated.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS Area Lighting Controller Heavy-duty relay w/0-10V DimmingEN-ALC-1R10V-GB2-BK WattstopperThe Area Lighting Controller (ALC) provides a high-power switching and dimming interface between a group of luminaires and the GreenBusâ„¢ communication network.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS Wireless Area Lighting Controller, Damp RatedEN-ALC-ZB-BK-DR WattstopperThe Wireless Area Lighting Controller (WALC) is a wireless control device that operates a switched line AC and 0-10V control to luminaires and is Damp Rated.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS Wireless Area Lighting ControllerEN-ALC-ZB-BK WattstopperThe Wireless Area Lighting Controller (WALC) is a wireless control device that operates a switched line AC and 0-10V control to luminaires.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS Luminaire Control Module, Isolated, Damp RatedEN-LCM-1R10V-GB2BKDR WattstopperThe Wired Luminaire Control Module (LCM) is a 0-10V luminaire level load controller with an internal relay capable of switching AC loads and is Damp Rated.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS Luminaire Control Module, IsolatedEN-ILCM-1R10V-GB2-BK WattstopperThe Wired Luminaire Control Module (LCM) is a 0-10V luminaire level load controller with an internal relay capable of switching AC loads
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS Wireless Site Lighting Control Module (WSLC), BlackEN-OC-SLC-ZB WattstopperThe Wireless Site Lighting Control (WSLC) Module extends the Wattstopper PLUS lighting controls capability to a building's surroundings or sites such as parking lots and short pathways, via a wireless mesh network.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS Phase Cut Dimming Module, BlackEN-PCDM-GB2 WattstopperThe Phase-Cut Dimming Module (PCDM) provides an interface between the phase-cut dimmable (forward- and reverse-phase) luminaires and the Wattstopper PLUS Lighting Control System.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS Wireless Control Module, Damp RatedEN-WCM2-ZB-DR WattstopperThe Wireless Control Module (WCM) enables each ballast or LED driver to be independently controlled and configured to meet the facility's needs and is Damp Rated.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS Wireless Control ModuleEN-WCM2-ZB WattstopperThe Wireless Control Module (WCM) enables each ballast or LED driver to be independently controlled and configured to meet the facility's needs
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper Plus Zigbee Connected Lighting Module, WhiteZBHA-CLM-DIM WattstopperThe Connected Lighting Module (CLM) is a wireless device designed to easily add individual luminaire control to spaces, delivering the ultimate flexibility to building managers
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS ESRN Emergency Lighting Load Control Relay, YellowESRN WattstopperThe Wattstopper PLUS ESRN Emergency Lighting Load Control Relay is designed for applications that require an emergency load to be switched on during a loss of normal power.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS DALI Switch Relay Module, WhiteDALI-SWITCH-SO WattstopperThe DALI Switch SO provides the capability to switch non-dimming loads within a DALI based Wattstopper PLUS Lighting Control System.
-
Added to Favorites Go to favoritesRemove from favorites?Something went wrong. Please try again later.Product not added for comparison. Please remove any current selection to add this. Manage SelectionsWattstopper PLUS SensiLUM Module, WhiteEN-CLM-PIR-DD-ZB WattstopperThe SensiLUM wireless integrated sensor family enables real-time occupancy detection, daylighting harvesting, and individual or group control of luminaires